Troubleshooting

Troubleshooting

Important: It is essential that all operator safety mechanisms be connected and in proper operating condition prior to mower use.

When a problem occurs, do not overlook the simple causes. For example: starting problems could be caused by an empty fuel tank.

The following table lists some of the common causes of trouble. Do not attempt to service or replace major items or any items that call for special timing of adjustment procedures (such as valves, governor, etc.). Have this work done by your Engine Service Dealer.

Note: When disconnecting electrical connectors DO NOT pull on the wires to separate the connectors.

Problem		Possible Cause		Corrective Action

Starter does not crank	1.	PTO is engaged.	1.	Disengage the PTO.
	2.	Parking brake is not engaged.	2.	Set the parking brake.
	3.	Drive levers are not in neutral lock	3.	Ensure the drive levers are in the neutral
		position.		lock position.
	4.	Battery does not have a full charge.	4.	Charge the battery. See Check
				Battery Charge and Recommended
				Jump Starting Procedure sections in
				Maintenance.
	5.	Electrical connections are corroded, loose	5.	Check the electrical connections for
		or faulty.		good contact. Clean connector terminals
				thoroughly with electrical contact cleaner,
				apply dielectric grease and reconnect.
	6.	Fuse is blown.	6.	Replace the blown fuse.
	7.	Relay or switch is defective.	7.	Contact an Authorized Service Dealer.

Engine will not start, starts hard, or fails to	1.	Fuel tank is empty.	1.	Fill the fuel tank.
keep running	2.	Fuel shutoff valve is closed.	2.	Open the fuel shutoff valve.
	2.	Fuel shutoff valve is closed.	2.	Open the fuel shutoff valve.
	3.	Oil level in the crankcase is low.	3.	Add oil to the crankcase.
	4.	The throttle is not in the correct position.	4.	Be sure the throttle control is midway
				between the “SLOW” and “FAST”
				positions.
	5.	Dirt in fuel filter.	5.	Replace the fuel filter.
	6.	Dirt, water, or stale fuel is in the fuel	6.	Contact an Authorized Service Dealer.
		system.
	7.	Air cleaner is dirty.	7.	Clean or replace the air cleaner element.
	8.	Seat switch is not functioning properly.	8.	Check the seat switch indicator. Replace
				seat if needed.
	9.	Electrical connections are corroded, loose	9.	Check the electrical connections for
		or faulty.		good contact. Clean connector terminals
				thoroughly with electrical contact cleaner,
				apply dielectric grease and reconnect.
	10.	Relay or switch is defective.	10.	Contact an Authorized Service Dealer.

Engine loses power	1.	Engine load is excessive	1.	Reduce the ground speed.
	2.	Air cleaner is dirty.	2.	Clean or replace the air cleaner element.
	3.	Oil level in the crankcase is low.	3.	Add oil to the crankcase.
	4.	Cooling fins and air passages for the	4.	Remove the obstructions from the cooling
		engine are plugged.		fins and air passages.
	5.	Vent hole in the fuel cap is plugged.	5.	Clean or replace the fuel cap.
	6.	Dirt in fuel filter.	6.	Replace the fuel filter.
	7.	Dirt, water, or stale fuel is in the fuel	7.	Contact an Authorized Service Dealer.
		system.

LZDS specifications

The Exmark LZDS stands as a benchmark in the world of commercial lawn care equipment. Designed specifically for landscape professionals, the LZDS combines power, efficiency, and precision to deliver exceptional results in varied conditions. One of its hallmark features is the robust engine, engineered to handle large-scale mowing tasks without sacrificing reliability. The Exmark LZDS is equipped with a powerful Kohler Command Pro engine, which provides superior torque and smooth operation, making it ideal for tackling tough terrains.

The LZDS showcases Exmark’s signature UltraCut deck technology, which is designed to enhance cutting performance and deliver a clean, even cut. The deck comes in various sizes, allowing users to choose the perfect fit based on their specific mowing requirements. The heavy-duty construction ensures durability, while the unique design minimizes clumping and provides improved airflow, contributing to a flawless finish on every lawn.

One of the standout characteristics of the Exmark LZDS is its zero-turn capability. This feature allows for unparalleled maneuverability, enabling operators to navigate complex landscapes with ease. The intuitive controls and comfortable seating position reduce operator fatigue, allowing for longer work sessions without discomfort. The ergonomic control layout makes it easy to adjust settings on the fly, enhancing overall productivity and precision.

In addition to its mechanical advantages, the LZDS also incorporates sophisticated technologies aimed at optimizing the mowing process. The mower features a practical SmartPower system, which automatically adjusts the engine’s power output based on the load, ensuring optimal performance and fuel efficiency. This technology helps professionals achieve the best results while reducing operational costs.

Safety is a paramount consideration in the design of the LZDS, which includes features like a rollover protection system and easy-to-reach controls positioned for quick access. The mower’s durable design is complemented by easy-access maintenance points, making routine servicing straightforward.

In conclusion, the Exmark LZDS embodies the perfect fusion of innovation, power, and efficiency. With its high-performance engine, advanced cutting technology, and user-friendly features, it is tailored for professionals seeking reliable and effective solutions for lawn care. Whether it's maintaining expansive commercial properties or tackling intricate residential landscapes, the Exmark LZDS delivers outstanding performance that caters to the demanding needs of the landscaping industry.

Exmark LZDS manual Troubleshooting, Problem Possible Cause Corrective Action

Models: LZDS

Problem

Possible Cause

Corrective Action

Jump Starting Procedure sections in

LZDS specifications