Exmark TR23KC manual 1.6SAFETY SIGNS

1.6SAFETY SIGNS

1.6.1Keep all safety signs legible. Remove all grease, dirt, and debris from safety signs and instructional labels.

1.6.2Safety signs must be replaced if they are missing or illegible.

1.6.3When new components are installed, be sure that current safety signs are affixed to the replaced components.

1.6.4New safety signs may be obtained from your authorized Exmark equipment dealer or distributor or from Exmark Mfg. Co. Inc.

1.6.5Safety signs may be affixed by peeling off the backing to expose the adhesive surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.

1.6.6Familiarize yourself with the following safety signs and instruction labels. They are critical to the safe operation of your Exmark commercial mower.

PART NO. 1-553049

LOCATION: On Top Front LH Surface of Mower Deck

For FMD524 & FMD604 Units with SN 410,000 – 439,999

PART NO. 103-1077

LOCATION: Front RH Side of Mower Deck

PART NO. 1-513747

LOCATION: Top Front of Battery Cover

FMD524 & FMD604 units only PART NO. 103-2239

LOCATION: Top of Mower Deck, Beneath Center Shield

- 8 -

PART NO. 1-543624

LOCATION: Front Right Foot Support

PART NO. 103-2432

LOCATION: Left Side of

Brake Lever

PART NO. 1-513746

LOCATION: Surface of Engine Deck Next to Muffler

PART NO. 1-553040

LOCATION: Top Surface of Hydraulic Reservoir

For FMD524 & FMD604 Units with SN 540,000 & Higher

PART NO. 103-7491

LOCATION: Front RH Side of Mower Deck

PART NO. 1-303508

LOCATION: On Top RH Surface

of Mower Deck