Exmark Specifications, 2.1MODEL NUMBER TR23KC 2.2ENGINE, 2.3FUEL SYSTEM, 2.4ELECTRICAL SYSTEM

2.SPECIFICATIONS

2.1MODEL NUMBER: TR23KC

2.2ENGINE

2.2.1Engine Specifications: See your engine owners manual.

2.2.23600 RPM (No Load)

2.3FUEL SYSTEM

2.3.1Capacity: 5.0 gal. (18.9 L.)

2.3.2Type of Fuel: Regular unleaded gasoline 87 octane or higher. In countries using the research method, it should be a 90 octane minimum.

2.3.3Fuel Filter: Replaceable in-line

2.3.4Fuel Shut-Off Valve: 1/4 turn

2.4ELECTRICAL SYSTEM

2.4.1Charging System: Flywheel alternator

2.4.2Charging Capacity: 15 amp

2.4.3Battery Type: BCI Group U1, 235 amps at 0° F

2.4.4 Battery Voltage: 12 Volt Polarity: Negative ground

2.4.5Fuses: 20, and 30 amp blade type, 20 amp to charging circuit; 20 amp to electric clutch; 30 amp to electro-mechanical actuator.

2.4.6Safety Interlock System: Operator must be positioned in the seat with PTO disengaged and brake engaged to start engine. Operator must be in seat when PTO is engaged or when brake is disengaged or the engine will stop.

2.5OPERATOR CONTROLS

2.5.1Steering Control: Aircraft-style steering yoke.

2.5.2Motion Control: Single foot pedal operated by the right foot. Provides forward and reverse speed control with little effort. Motion control pedal and linkages are protected by the motion override device when the parking brake is engaged.

2.5.3Parking Brake Lever: Engages park brake and locks drive system in neutral. Neutral lockout system prevents accidental engagement of drive system when park brake is engaged and protects hydro-transaxle from potential damage.

2.6SEAT

2.6.1Type: high back, foam padded (internal suspension) with standard arm rests.

2.6.2Mounting: Attached to activate a seat switch and attached to a seat spring for maximum comfort over rough terrain. Adjustable fore and aft.

2.6.3Armrests: foam padded flip-up armrests with height adjustment standard.

2.6.4Seat Safety switch: Incorporated into the Safety Interlock System. Time delay seat switch eliminates rough ground cut-outs.

2.7HYDROSTATIC GROUND DRIVE SYSTEM

2.7.1Hydrostatic transmission: Eaton 851 transaxle with 23:1 reduction ratio.

2.7.2Hydrostatic direction control system is protected by a neutral lockout system.

2.7.3Hydraulic Oil: Use Mobil 1 15W-50 Synthetic Motor Oil.

2.7.4Hydraulic Oil Capacity: 8.5 qts. (8.0 L.)

2.7.5Filter: Replaceable cartridge type

Exmark P/N 1-513211: 10 micron, 18 psi bypass

2.7.6Speeds: 0 - 6.4 mph (10.2 km/hr) forward; 0 - 3.2 mph (5.1 km/hr) reverse

2.7.7Drive wheel release lever allows machine to be moved when engine is not running.

-10 -