Maintenance

Periodic Maintenance

Check Engine Oil Level

Service Interval: Before each use or daily

1.Stop engine and wait for all moving parts to stop. Make sure unit is on a level surface.

2.Check with engine cold.

3.Clean area around dipstick. Remove dipstick and wipe oil off. Reinsert the dipstick and push it all the way down into the tube. Do Not screw into place. Remove the dipstick and read the oil level.

4.If the oil level is low, wipe off the area around the oil fill cap, remove cap and fill to the “FULL” mark on the dipstick. Use oil as specified in Engine Owner’s Manual. Do Not overfill.

Important: Do Not operate the engine with the oil level below the “LOW” (or “ADD”) mark on the dipstick, or over the “FULL” mark.

Check Battery Charge

Service Interval: Monthly

WARNING

CALIFORNIA

Proposition 65 Warning

Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Wash hands after handling.

Allowing batteries to stand for an extended period of time without recharging them will result in reduced performance and service life. To preserve optimum battery performance and life, recharge batteries in storage when the open circuit voltage drops to 12.4 volts.

Note: To prevent damage due to freezing, battery should be fully charged before putting away for winter storage.

Check the voltage of the battery with a digital voltmeter. Locate the voltage reading of the battery in the table and charge the battery for the recommended

time interval to bring the charge up to a full charge of 12.6 volts or greater.

Important: Make sure the negative battery cables are disconnected and the battery charger used for charging the battery has an output of 16 volts and 7 amps or less to avoid damaging the battery (see chart for recommended charger settings).

Voltage

Percent

Maximum

Charging

Reading

Charge

Charger

Interval

 

 

Settings

 

12.6 or

100%

16 volts/7

No

greater

 

amps

Charging

 

 

 

Required

12.4 – 12.6

75–100%

16 volts/7

30 Minutes

 

 

amps

 

12.2 – 12.4

50–75%

16 volts/7

1 Hour

 

 

amps

 

12.0–12.2

25–50%

14.4 volts/4

2 Hours

 

 

amps

 

11.7–12.0

0–25%

14.4 volts/4

3 Hours

 

 

amps

 

11.7 or less

0%

14.4 volts/2

6 Hours or

 

 

amps

More

Check Mower Blades

Service Interval: Before each use or daily

1.Stop engine, wait for all moving parts to stop, and remove key. Engage parking brake.

2.Lift deck and secure in raised position as stated in the Clean Grass Build-Up Under Deck procedure.

3.Inspect blades and sharpen or replace as required.

4.Reinstall blades (if they were removed) in the following order:

A.Install bushing through blade with bushing flange on bottom (grass) side of blade.

23

Page 22 Page 24
Page 23
Image 23
Exmark TT23KAE, TT20KCE manual Check Engine Oil Level, Check Battery Charge, Check Mower Blades
Page 22 Page 24

TT23KAE, TT20KCE specifications

Exmark, a leading manufacturer in commercial mowers and outdoor power equipment, has introduced robust models such as the TT23KAE and TT20KCE. Designed with professional landscapers in mind, these mowers are engineered to deliver exceptional performance, durability, and ease of use.

The Exmark TT23KAE is powered by a 23-horsepower Kohler engine, providing the muscle necessary for tackling even the toughest mowing jobs. This model features a 52-inch mowing deck, ensuring a wide cutting path and increased productivity. The innovative Triton™ mower deck technology allows for superior grass cutting performance. It’s designed for optimum airflow, which enhances the quality of cut and grass dispersal. The adjustable cutting heights offer versatility, allowing users to customize the mowing experience according to their specific needs.

On the other hand, the Exmark TT20KCE offers a slightly smaller yet equally efficient option, powered by a 20-horsepower Kohler engine. This model has a 48-inch mowing deck, making it an excellent choice for tighter spaces while maintaining a high level of efficiency. Like its counterpart, the TT20KCE features the Triton mower deck technology, ensuring clean cuts and excellent grass management.

Both models utilize Exmark’s patented, heavy-duty frame and durable construction, ensuring longevity even in the most demanding conditions. They come equipped with a user-friendly control system, allowing for precise maneuverability and ease of operation. The ergonomic design of the operator’s platform reduces fatigue during extended use, making these mowers comfortable for daily handling.

Incorporating advanced technology, both models boast a safety system that prevents accidental starts, enhancing user safety. Additionally, the intuitive design of the maintenance points simplifies routine checks and service, allowing operators to spend more time mowing and less time on upkeep.

Furthermore, both mowers offer impressive fuel economy, reducing operational costs for landscaping businesses. Their compact design allows for easy transport and storage, making them ideal for a range of job sites.

The Exmark TT23KAE and TT20KCE have carved out their niche in the commercial mowing sector by blending power, technology, and user-friendly design. Whether tackling large lawns or navigating tight residential spaces, these mowers deliver unmatched performance and reliability, making them essential tools for landscape professionals.
Top Page Image Contents