Extreme Networks manual 1WM-4T1i Module LEDs, Led

Installing the WM-4T1i Module

Figure 1-2: WM-4T1i LEDs

Table 1-1 describes the LED behavior on the WM-4T1i module.

Table 1-1:WM-4T1i Module LEDs

LED	Color	Indicates
Status	Off	No power
	Amber	Module seated in chassis
	Green	Module powered up
Diag	Green (blinking)	Power-on Self Test (POST) is running
	Off	Normal operation
T1 port (1-4)	Amber	Near-end fault detected (for example, no cable)
	Rapidly blinking	Far-end fault detected
	amber
	Slowly blinking	Physical link present, but no higher-layer link (port
	amber	misconfigured or disabled)
	Green	Physical link present, higher-layer link established,
		no traffic
	Alternating green	Physical link present, higher-layer link established,
	and amber	traffic present
	Green (blinking)	Loopback testing mode
10/100 port	Off	No link present
(5,6)
	Green	Link present
	Alternating green	Traffic present
	and amber

1-4 WM-4T1i Module Installation and User Guide