Extron electronic 14400 setup guide Three, Remote Control, Installation, cont’d Front Panel

Installation, cont’d

Front Panel

CONFIG	POWER SUPPLY
	PRIMARY
	REDUNDANT
	FOX 4G MATRIX 14400
	FIBER OPTIC DIGITAL MATRIX SWITCHER
7	8

Figure 2-7 — Front panel configuration port

G	Configuration port — If desired, connect a control system
	or computer to the front panel Configuration (RS-232) port.
	Use an optional 9-pin D to 2.5 mm mini jack TRS RS-232
	cable, part #70-335-01.

H Primary and Redundant Power Supply LEDs —

Green — Indicates that the associated power supply is operating within normal tolerances.

Red — Indicates that the associated power supply is operating outside the normal tolerances or has failed. See chapter 4, “Maintenance and Modifications”, to replace the power supply.

2-6 FOX 4G Matrix 14400 • Installation

FOX 4G Matrix 14400

Chapter3Three

Remote Control

Selected SIS Commands

Installing and Starting the Control Program

Accessing the HTML Pages

Refer also to the FOX 4G Matrix 14400 User’s Manual at www.extron.com.