Extron electronic 14400 setup guide Remote Control, cont’d

	3-4
Refer	FOX 4G
also to the FOX 4G Matrix 14400 User’s Manual at	Matrix 14400 • Remote Control
www.extron.com.

Command	ASCII command	Response	Additional description
	(host to switcher)	(switcher to host)

Create ties

N• Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%.

•The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003%).

N The & tie command for RGB and the % tie command for video can be used interchangeably.

NThe & read tie command for RGB and the % read tie command for video can be used interchangeably.

Tie input X!to output X@, video	X!*X@!	OutX@•InX!•All]	Tie input X!‘s video and audio to output
and audio			X@.
Example:	1*3!	Out03•In01•All]	Tie input 1 video and audio to output 3.
Tie input X!to output X@, RGBHV	X!*X@&	OutX@•InX!•RGB]	Audio breakaway.
only
Example:	10*4&	Out04•In10•RGB]	Tie input 10 RGB to output 4.
(see 2nd Note, above)
Tie input X!to output X@, video	X!*X@%	OutX@•InX!•Vid]	Audio breakaway.
only
Example:	7*5%	Out05•In07•Vid]	Tie input 7 video to output 5.
(see 2nd Note, above)
Read RGB output tie	X@&	X!]	RGBHV input X!is tied to output X@.
Read video output tie	X@%	X!]	Video input X!is tied to output X@.
N X!= Input number	00 – (maximum number of inputs for your configuration) (00 = untied)
X@= Output number	01 – (maximum number of outputs for your configuration)

Remote Control, cont’d

Command	ASCII command	Response	Additional description
	(host to switcher)	(switcher to host)

Refer also to the FOX 4G	FOX
Matrix	4G

Channel mute commands

Channel mute	X@*1B	VmtX@*1]
Channel unmute	X@*0B	VmtX@*0]
Read channel mute	X@B	X#]
Global channel mute	1*B	Vmt1]
Global channel unmute	0*B	Vmt0]
View output mutes	EVM}	X#1, X#2, ... X#n]

Mute output X@(no signal is output, but the light output remains active).

Unmute output X@(signal is output).

1 = mute on, 0 = mute off. Mute all light outputs. Unmute all light outputs.

Each X#response is the mute status of an output, starting from output 1.

n = the maximum number of outputs for your configuration.

14400 User’s Manual at www.extron	Matrix 14400 • Remote
.com.	Control

Save and recall presets

NIf you try to recall a preset that is not saved, the matrix switcher responds with the error code E11.

Save current configuration as a	X$,		SprX$]	Command character is a comma.
global preset
Example:	9,		Spr09]	Save current ties as preset 9.
Recall a global preset	X$.		RprX$]	Command character is a period.
Example:	5.		Rpr05]	Recall preset 5, which becomes the current
				configuration.
N X@= Output number		01 – (maximum number of inputs for your model)
X#= Mute		0	= not muted, 1 = muted
X$= Global or room preset #		0	- 64

3-5