Extron electronic 3G-AE 100 manual Panels and Cabling, Front Panel Features, 3G-AE100

Panels and

Cabling

This section covers the following:

•Front Panel Features

•Rear Panel Features and Cabling

Front Panel Features

1 2

RATE	NOT
270 Mbps 1.485 Gbps 2.97 Gbps
	RECOGNIZED

3G-AE 100

MULTI-RATE SDI AUDIO EXTRACTOR

APower LED — lights green when the unit is receiving power.

BRate LEDs — indicate the data rate of the incoming SDI signal (270 Mbps,

1.485 Gpbs, or 2.97 Gbps). If a signal is unrecognized, the “Not Recognized” LED will light.

Rate LEDs will light once from left to right as a power up sequence when the unit is powered.

Rear Panel Features and Cabling

The following section covers rear panel features and cabling procedures. If mounting is necessary before connecting cables, see the Mounting section on page 7.

ATTENTION: Turn the input and output devices off and unplug their power cords. Verify that the 3G-AE 100 is disconnected from the power source before proceeding.

3G-AE 100 • Panels and Cabling 2