Remote/Auto-SW

Tx Rx _ A S

SW DVI Plus Switcher Rear Panel RS-232 Port

NOTE: If you use cable that has a drain wire, tie the drain wire to ground at both ends.

Ground (_)

Receive (Rx) Transmit (Tx)

Transmit (Tx) Receive (Rx)

Computer or

Control System

RS-232 Port

Figure 12. Remote/Auto-SW Connector Pin Assignments for RS-232

Enabling Auto-input Switching

You can set up the SW DVI Plus to automatically select the active connected input based on detection of a video sync signal. If two or more inputs are active, the input with the highest number is selected (for example, input 8 on an SW8 DVI Plus switcher). When auto-input switching is in effect, the green Auto Switch LED on the front panel lights and the front panel input selection buttons are disabled.

NOTE: Audio and video cannot be switched separately when auto-input switching is enabled.

SW2/SW4 DVI Plus (Non-audio) Models

On the non-audio SW2 and SW4 DVI Plus, auto-input switching is enabled or disabled via the following SIS commands (see the “Remote Configuration and Control” section, beginning on page 18, for information on using SIS commands).

•1# selects normal switch mode.

•2# selects auto-input switch mode.

All Other Models

To enable auto-input switching on the SW2, SW4, SW6, and SW8 DVI A Plus models and on the SW6 and SW8 DVI Plus non-audio models:

1.Cut a small piece of wire to use as a jumper.

2.Insert the ends of the wire into slots 4 and 5 of the provided 5-pole captive screw plug, connecting pins 4 and 5 together.

3.Use a small screwdriver to tighten the two screws of the plug above pin slots 4 and 5, so that the jumper wire ends remain securely in place (see

the illustration at right).

4. Insert the plug into the 5-pole Auto-SW captive screw connector on the switcher rear panel.

Figure 13 on the next page shows an SW8 DVI A Plus with a jumper connecting pins 4 and 5 to enable auto-input switching.

SW DVI Plus Series • Installation 10

Page 15 Page 17
Page 16
Image 16
Extron electronic 68-1316-02 manual Enabling Auto-input Switching, SW2/SW4 DVI Plus Non-audio Models, All Other Models
Page 15 Page 17

68-1316-02 specifications

The Extron Electronic 68-1316-02 is a versatile, professional-grade component designed for seamless integration into various audio-visual systems. Designed primarily for the educational and corporate environments, this device offers a range of features that enhance user experience and operational reliability.

One of the main features of the Extron 68-1316-02 is its robust connectivity options. Equipped with multiple input and output configurations, it supports a wide range of devices including computers, projectors, and displays. This flexibility ensures that various audio and video sources can be connected effortlessly, allowing for an efficient and dynamic setup.

The device utilizes Extron's renowned signal processing technology, which provides superior signal integrity and quality. This technology minimizes signal degradation, ensuring that high-definition images and clear audio are delivered consistently. Additionally, the unit supports resolutions up to 4K, making it suitable for modern high-resolution display systems.

Another characteristic that sets the Extron 68-1316-02 apart is its intuitive user interface. The device features a straightforward control panel that allows users to navigate through settings and options easily. This user-centric design ensures that even individuals with minimal technical expertise can operate the system effectively.

Moreover, the Extron 68-1316-02 includes advanced features such as EDID (Extended Display Identification Data) management, which optimizes the compatibility between the connected sources and displays. This reduces the occurrence of display issues, contributing to a smoother operation in environments where multiple devices are utilized.

The device also boasts a range of mounting options, whether ensuring it fits seamlessly within a rack or being wall-mounted in a conference room. Its compact design allows for flexible placement in various settings without compromising on performance.

Further enhancing its appeal, the Extron 68-1316-02 comes with comprehensive technical support and documentation, which ensures that users can maximize the device's potential.

In conclusion, the Extron Electronic 68-1316-02 is a highly capable component tailored for the demands of contemporary audiovisual environments. With its excellent connectivity, superior signal processing technology, and user-friendly features, it stands out as a reliable solution for educational and corporate applications alike, facilitating enhanced communication and collaboration.
Top Page Image Contents