SerialCommunicationsunications,cont’d

The control panel module must be programmed before it can be operated. Programming can include setting several serial port variables to match the device to be controlled and includes entering the primary and secondary (if applicable) code for each button.

You can program the control panel module either by using the ICS100 windows control program or by sending individual ASCII commands. Both programming methods require that a serial port cable be connected between a computer and the control panel module’s serial port.

ICS100 Windows Control Program

The ICS100 Control Program, a graphical control software for Windows, provides a way to program the control panel module.

System requirements

•Operating system —

Windows 95 / 98 / ME / NT / 2000 / XP / XP Pro

If using Windows NT, Service Pack 6 must be installed.

•Hardware — Pentium 150 or faster CPU

•Memory — Minimum: 128 MB Recommended: 256 MB

•Screen resolution — Minimum: 800 x 600 Recommended: 1024 x 768

•Disk space — 5 MB

Installing the software

The control program is contained on a CD-ROM, and must be installed on the hard drive.

1.	Click Start > Run.
2.	Click the Browse button. An open file window appears.
3.	Navigate to the drive or folder that contains the software.
4.	Double click the setup icon.
5.	Click Ok in the Run window.
6.	Click Ok in the InlineControl Setup window.
7.	Click the icon button in the next InlineControl Setup to
	install the software in the default (Extron) directory in the
	Program group.

If you want to specify a different directory, click on the

Change Directory button.

8. The next InlineControl Setup window that appears indicates when setup is complete. Click Ok.

Starting the program

Start the control program and establish communications with the CTL208 as follows:

1. Click Start > Programs > Extron > ICS100. The control program window (figure 4-1) appears.

The CTL208 will not respond until it has been contacted with the valid address; after a moment, the program reports a failure to connect (figure 4-1).

Figure 4-1 — ICS100 program window and warning

2. Click OK.

The control panel module’s serial port is factory- configured to 9600 baud, no parity, no flow control, half- duplex mode. If desired, serial port settings can be changed from within the ICS100 program.

3. If you need to change serial port settings, click Communications > Comm Port > Comm 1 (or the correct Comm port). The Serial Port Setup window appears (figure 4-2).

Figure 4-2 — Serial Port Setup window

4-2

CTL208CM Control Panel Module • Serial Communications

4-3

CTL208CM specifications

The Extron CTL 208 CM is a sophisticated control system designed for seamless integration and management of AV systems in various environments, such as educational institutions, corporate spaces, and any setting requiring robust audiovisual control. Known for its user-friendly interface and advanced features, the CTL 208 CM stands out in its category.

One of the primary features of the CTL 208 CM is its ability to control multiple AV devices through a single platform. This centralized control facilitates ease of operation for users, allowing them to manage projectors, displays, sound systems, and other devices without the need to juggle multiple remotes or interfaces. This is particularly beneficial in environments where educators or presenters need to focus on delivering their content without getting bogged down by technicalities.

The CTL 208 CM is equipped with Extron’s proprietary technologies, which enhance its performance and reliability. Notable among these is the Extron Control App, which allows users to create custom controls via a tablet or smartphone. This not only streamlines the user experience but also enables personalized settings, ensuring users can quickly access the devices they need.

Additionally, the CTL 208 CM features customizable button layouts and a graphic interface that simplifies operation, regardless of the user's technical proficiency. This flexibility is crucial in environments where users may vary significantly in their comfort level with technology.

The system's advanced communication capabilities enable it to integrate seamlessly with a variety of third-party devices, expanding its functionality and compatibility. This open architecture design supports popular protocols such as RS-232, IP control, and infrared, allowing users to implement it alongside existing infrastructures effectively.

Moreover, the CTL 208 CM boasts a scalable architecture, making it suitable for small to large installations. Users can easily expand their control system as their needs evolve without requiring a complete overhaul of their existing setup.

In summary, the Extron CTL 208 CM is a powerful control solution that combines ease of use with extensive functionality. Its advanced technologies and features position it as an ideal choice for anyone seeking a reliable and versatile AV control system. With its ability to simplify AV management and enhance user engagement, the CTL 208 CM is a valuable asset for modern audiovisual environments.

Extron electronic CTL208CM SerialCommunicationsunications,cont’d, ICS100 Windows Control Program

Models: CTL208CM