Extron electronic DSC 301 HD manual Symbol Definitions, = Ntsc, = Secam, = Pal, Input Preset

Symbol Definitions

• = Space

] = Carriage return with line feed

¦or} = Carriage return with no line feed E or W = Escape

14= Superscripts indicate the error message displayed if the command is entered incorrectly or with invalid parameters. See “Error Response References” on page 21.

X! = Input selection, 1-3

X@ = Output selection, 1 = HDMI

X# = Input video format: 1 = RGB

2 = YUV

3 = Composite

4 = HDMI

X$ = Horizontal or vertical start — 0 to 255 (default midpoint = 128) X% = Pixel phase — 0 to 63 (default = 31)

X^ = Total pixels — (±512 of the default value) X& = Active pixels — (±512 of the default value) X* = Active lines — (±256 of the default value)

X( = Enable or disable; 0 = Off or disable, 1 = On or enable

X1) = Input standard:
0	= No signal detected	3	= NTSC 4.43
1	= NTSC 3.85	4	= SECAM
2	= PAL

-= N/A (occurs when input is an active RBG, YUV [but not NTSC/PAL], or HDMI signal X1! = Internal temperature (in degrees Celsius)

X1@ = Horizontal and vertical frequencies (format is three-digit with single decimal and leading zeros for example, 075.3)

X1# = Text label or preset name: up to 16 characters

NOTE: User and input presets saved without a name are saved with the default names “User Preset xx” (for example, User Preset 12) or Input Preset xxx (for example

Input Preset 006).

X1$ = Picture adjustment — 0 to 127 (default 64)

X1% = Horizontal and vertical position, range depends on resolution, with leading “+” or “-”, for example, “-1075”

X1^ = Horizontal and vertical size, range range depends on resolution

DSC 301 HD • SIS Communication and Control 22