Extron electronic DSC 301 HD Input presets, Input preset name, X2 ,X1# Pnam Pnam2*X2,X1#, Ex!Amem

Command	ASCII Command	Response	Additional Description
	(host to scaler)	(scaler to host)

Input presets

Recall preset	2*X2).	2RprX2)]
Save preset	2*X2),	2SprX2)]
Delete/clear preset	EX2*X2)PRST}	PrstX2*X2)]

Recall input preset X2) for selected input.

Save input preset X2) for selected input.

Clears input preset X2), and sets input preset X2) name to [unassigned].

Input preset name

Write name	E2*X2),X1#PNAM}	Pnam2*X2),X1#]	Set the input preset X2) to X1#.
Read name	E2*X2)PNAM}	X1#]	Read the name for input preset X2).

NOTE: Unassigned presets = “[unassigned]”. To restore a default user preset name, enter a single space character for X1#. Valid only for previously saved presets.

User Presets

Input Presets

	Color	H/V Image		Color	H/V Image	Input Type	H Start
			Position		Position
	Tint	H/V Image		Tint	H/V Image	Audio Gain/	V Start
			Size		Size	Attenuation
	Contrast	Preset Name		Contrast	Preset Name	Film Mode	H Active
	Brightness			Brightness		Total Pixels	V Active
	Detail			Detail			Phase
	Figure 18. Values Saved in User and Input Presets
Auto memories (per input)
Enable			EX!*1AMEM}		AmemX!*1]			Set auto memory on. Previous settings
								for incoming signal are auto recalled.
Disable			EX!*0AMEM}		AmemX!*0]			Set auto memory off. Manual recall
								of input presets needed to configure
								input.
			EX!AMEM}		X(]
View setting								View current auto memory for input
								X!.

NOTE: X! = Input selection: 1 to 3

X( = Enable or disable: 0 = Off or disable, 1 = On or enable

X1# = Text label or preset name, up to 16 characters

X2) = Input presets, 1-128(global)

DSC 301 HD • SIS Communication and Control 30