F | Label — a label on the top panel identifies the unit as the |
| transmitter (Tx, left panel of the figure below) or receiver (Rx, |
| right panel of the figure below) and also identifies the fiber optic |
| port numbers and the power input. |
Extron
TO COMPUTER (Tx)
PN
5 V |
| 1 2 3 4 |
|
www.extron.com
Extron
TO DISPLAY (Rx)
PN
5 V |
| 4 3 2 1 |
|
www.extron.com
Bottom panel features
The bottom panels of both the transmitter and receiver have a label that identifies the unit’s serial number. There is also a second power LED that mirrors the signals given by the LED on the top panel.
Side panel features (transmitter only)
| 7 |
G | EDID Minder storage button (transmitter only) — A recessed |
| switch activates the transmitter to capture and store EDID |
| information from the display device. This allows the source |
| device to provide a signal with a resolution and refresh |
| rate matching the needs of the display device. (For more |
| information, see the next section, “Setup and Operation”.) |
DVI 104 Tx/Rx • User’s Guide | 5 |
