Installation and Operation, cont’d

1. Loosely attach the mounting brackets to the transmitter or receiver using the four machine screws and washers supplied with the mounting kit.

2. Hold the transmitter or receiver against the inside of the surface through which it will be mounted. Mark the four screw holes on the inside of the surface to which you are mounting the device.

3. Drill four pilot holes, each 3/32" in diameter by 1/4" deep, where you made marks.

4. Using the provided four wood screws, secure the brackets to the mounting surface.

5. Slide the transmitter or receiver up and down in the mounting brackets until the face of the transmitter or receiver is at the desired height. Tighten the screws that secure the brackets in place.

If the screws are inaccessible to a screwdriver:

a. Mark the location of the brackets relative to the screws.

b. Remove the transmitter or receiver from inside the furniture.

c. Tighten the screws.

d. Replace the unit inside the surface (step 4).

Projector mounting

The receiver can be mounted on a projector bracket using either of the following optional Extron projector mounting kits:

•PMK 300 multi-product pole mount kit (part #70-374-01)

•PMK 350 low profile, multi-product pole mount kit (part #70-563-02[black] or part #70-563-03[white])

PMK 300 mounting

Mount the receiver to a PMK 300 bracket as follows:

1. If necessary, remove the feet from the bottom of the receiver.

2. Mount the receiver to one of the bracket’s three mounting plates using two of the supplied 4-40 x 3/16" screws in opposite (diagonal) corners to secure the device to the bracket. It can be vertically mounted facing either up or down (figure 2-5).

NOn the side mounting plates, the device is typically mounted on the outside of the bracket.

On the front mounting plate, the device is typically mounted on the inside of the bracket.

Side Mounting

Plate

Bracket

Brace

U-Bolt

Extron

DVI 201 or HDMI 201

Receiver

Power Supply

Extron

PMK 300

Multi-product Pole Mount Kit

Front Mounting

Plate

Figure 2-5 — PMK 300 projector mounting a receiver

3. If the power supply is connected to the receiver, use the two included tie wraps to strap the power supply to one of the brackets.

2-6

DVI 201 Tx/Rx • Installation and Operation

DVI 201 Tx/Rx • Installation and Operation

2-7

Page 10 Page 12
Page 11
Image 11
Extron electronic DVI 201 Rx, DVI 201 Tx user manual Projector mounting, PMK 300 mounting
Page 10 Page 12

DVI 201 Tx, DVI 201 Rx specifications

Extron Electronics is known for its innovative solutions in the field of professional AV signal distribution and extension. Among its robust product lineup are the DVI 201 Rx and DVI 201 Tx devices, which are essential for transmitting and receiving digital video signals with exceptional performance and reliability.

The Extron DVI 201 Tx is a DVI transmitter that seamlessly converts DVI signals to a format suitable for long-distance transmission. It features a DVI connector for input and utilizes advanced technologies to ensure minimal signal degradation. The DVI 201 Tx supports high-resolution video up to 1920x1200 at 60 Hz, making it ideal for high-definition applications, including presentations, video conferencing, and digital signage.

On the receiving end, the DVI 201 Rx is designed to receive the transmitted DVI signals and convert them back into a format ready for display. This device also supports resolutions up to 1920x1200 at 60 Hz, ensuring that users can enjoy crystal-clear image quality without loss of detail. The DVI 201 Rx features a straightforward installation process, allowing for plug-and-play functionality that reduces setup time and complexity.

Both the DVI 201 Tx and DVI 201 Rx employ Extron’s patented technology for signal integrity, which includes the use of equalization and error correction to maintain the reliability of the transmitted signals over longer distances. This aspect is crucial for installations that may involve several hundred feet of cabling, where conventional methods could lead to signal loss or corruption.

One of the key characteristics of both the DVI 201 Tx and DVI 201 Rx is their compatibility with a wide range of DVI-enabled devices. This versatility is particularly beneficial in diverse installation environments, such as corporate offices, classrooms, and control rooms, where different types of hardware may be in use.

Furthermore, both devices are designed with a compact form factor, allowing for easy placement in various setups, whether they are rack-mounted or positioned directly next to display devices. The robust construction and durable components ensure longevity and consistent performance over time, meeting the demands of professionals in the AV industry.

In summary, the Extron DVI 201 Rx and DVI 201 Tx are streamlined solutions for digital video signal transmission, showcasing innovative technology, high resolution support, and dependable performance, making them the preferred choice for AV professionals seeking quality and reliability.
Top Page Image Contents