Installation, cont’d
Integration Seamless Switcher • Installation2-2
Installation

Mounting the Switcher

Four uninstalled rubber feet are included with the switcher. If you are going to
rack mount the switcher, mount it before you cable it (see Rack mounting, below),
and do not install the rubber feet. If you are not rack mounting the switcher, see
Tabletop placement below.

Tabletop placement

For tabletop placement, install the self-adhesive rubber feet/pads (provided) onto
the four corners of the bottom of the switcher.

Rack mounting

To rack mount the switcher, use two screws on each end of the switcher to attach
the switcher to the rack (see figure 2-1).
BLACK12345678VIDEOCUT
DISSOLVE
12345678AUDIO
MUTE
COLOR/
TINTBRT/
CONTSIZECENTERFILTER
ADJUST
MENUNEXT
INPUTS
ISS 408
INTEGRATION SEAMLESS SWITCHER
Figure 2-1 — Mounting the switcher
n
ns