3-19Integration Seamless Switcher • Operation

2. Press the appropriate picture adjustment button: color and tint (Col/Tnt),
brightness and contrast (Brt/Cont), sizing (Size), centering (Center), or filter.
The LCD display shows the name of the adjustment and the current setting
value.
3. Rotate the Adjust knob or the Adjust knob to vary the settings within the
following adjustment ranges:
The Adjust knobs have no mechanical limits to their rotation.
•Color/Tint: Color adjusts within a range from 0 to 127.
Tint adjusts within a range from 0 to 255.
•Brightness/Contrast: The range for both adjustments is 0 to 63.
•Size: Observe the display and turn the Adjust knob to increase or
decrease the horizontal size of the image. Turn the Adjust knob
to increase or decrease the vertical size of the image. The
adjustment range depends on the output resolution selected.
•Center: Observe the display and turn the Adjust knob to center the
image horizontally or the Adjust knob to center the image
vertically. The adjustment range depends on the output
resolution selected.
•Horizontal and vertical filter (RGB or component video input):
Horizontal (Horz) adjusts within a range from 0 to 3.
Vertical (Vert) adjusts within a range from 0 to 7.
•Filter (S-video and composite video input):
Either knob adjusts within a range from 0 to 7.
4. Repeat steps 2 and 3 for each image adjustment to be made for that input.
Front panel security lockout (executive mode)
The front panel security lockout limits the operation of the Integration Seamless
Switcher from the front panel. When the switcher’s front panel is locked, all of the
front panel functions are disabled except for input selection, black/mute, cut, and
dissolve.
To toggle the front panel lock on and off, press and hold the Color/Tint and Center
buttons for approximately two seconds (figure 3-18). The LCD displays Executive
Mode Enabled or Executive Mode Disabled to indicate the mode. Release the
buttons. The LCD also displays Executive Mode Enabled if you push a locked out
button when the switcher’s front panel is locked.
10 sec.
timeout
Press and hold both buttons
simultaneously for 2 seconds
OR
Default
Cycle
COLOR/
TINT CENTER
ISS 408
Executive Mode
Enabled
ISS 408
Executive Mode
Enabled
Figure 3-18 — Front panel security lockout flowchart