VersaTools® MDA 3 Series, cont’d
Installation
The MDA 3 Series mini distribution amplifiers (DAs) can be mounted on a rack shelf, to a rack without a shelf, under a desk or tabletop, or on a projector bracket.
Rack mounting
For optional rack mounting, mount the MDA on any of the following rack shelves:
•RSF 123 VersaTools® rack shelf kit (part
•RSB 123 VersaTools rack shelf (part
•RSU 126 6" deep universal rack shelf kit (part
•RSB 126 6" deep basic rack shelf (part
•RSU 129 1U universal rack shelf kit (part
•RSB 129 1U basic rack shelf (part
On the standard rack shelf, the MDA mounts in one of four locations to the rear of the rack or in one of four locations to the front of the rack.
1. | If feet were previously installed on the bottom of the |
| MDA, remove them. |
2. | Mount the MDA on the rack shelf, using two |
| screws in opposite (diagonal) corners to secure the MDA |
| to the shelf. |
3. | Install blank panel(s) or other unit(s) to the rack shelf. |
Only products in the VersaTools line can be mounted to a VersaTools shelf. Any 1U
VersaTools Rack Shelf
1/4 Rack Width False Front
Face Plate
Use 2 mounting holes on |
|
opposite corners. | (2) |
|
Figure 1 — Rack mounting the MDAs on a
VersaTools rack shelf
Figure 2 — MDAs mounted on a standard rack shelf
2 | VersaTools® MDA 3 Series • Installation | VersaTools® MDA 3 Series • Installation | 3 |