Quick Start Guide — MDA EQ Series
To install and set up an MDA EQ Series mini distribution amplifier, follow these steps:
Step 1
Turn all of the equipment off and disconnect it from the power source.
Step 2
Mount the MDA EQ on a projector, under a desktop, or on a rack shelf, as illustrated below. (The illustration shows a VersaTools® rack shelf; you can also use the
Projector
Mounting
Bracket
Projector
Mounting Bolt
VersaTools Rack Shelf
1/4 Rack Width Front False Faceplate
Use 2 mounting holes on opposite corners.
(2)
Step 3
Wire the MDA EQ power cord and connect it. To wire the power cord, follow these steps, referring to the illustration on the next page.
a. Cut the DC output cord to the length needed.
b. Strip the jacket to expose 0.3 inches (7 mm) of the conductors.
c. Slide the leads into the supplied captive screw plug and lock them, using an Extron Tweeker (small screwdriver).
d. Use the supplied
VersaTools® MDA EQ Series • Quick Start Guide