Extron electronic MPA 181T user manual Rear Panel Features, Power input, 5 - Mounting the PMK

Installation and operation, cont’d

Rear Plate	Extron
	MPA 181T
Rubber Pad	Mini Power
	Amplifier
Extron
PMK 350
Above Projector	Cable Access
Mount Bracket
Extron
Power Supply	Front Plate
for MPA 181T

Cover Sheet

6.Secure the bracket to the U-bolt onto the ceiling pole with the included hex nuts, washers, and lock washers.

	Clamping
	Plate	Extron
		MPA 181T
Rubber Pad		Mini Power
		Amplifier

U-Bolt

Extron

PMK 300

Multi Product Projector

Mount Kit

Extron

PMP

6”, 10“ or 12” Projector Mount Pole

Cable Access

Extron

UPB 25

Universal Projector

Mounting Bracket

Figure 2-5 — Mounting the PMK 300

Rear Panel Features

5

INPUTS

(MONO)

L

POWER

REMOTE		MPA 181T
C	US	LISTED
		1T23
		I.T.E.

10V OUTPUTS VOL/MUTE

COM 70V

Projector

R

12V

3A MAX

L (MONO) R	70V
	4/8 Ohms

Figure 2-4 — Using the PMK 350 projector mounting kit for the MPA 181T

3.	Affix the black rubber pad to the mounting plate.
4.	Place the U-bolt behind, then through the two holes of the
	mounting plate to wrap around the ceiling pole.

For a typical (1.5" to 2.0" diameter) pole — The supplied U-bolt fits a typical ceiling pole.

5.Place the bracket on the opposing side of the ceiling pole and through the U-bolt legs.

1 2 3 4 6 7

Figure 2-5 — MPA 181T back panel

Power input

1Power connection — Plug the external 12 VDC power supply into this connector. The power supply is included with the unit.

2-6 MPA 181T • Installation and Operation MPA 181T • Installation and Operation 2-7