Quick Start Guide — MPA 181T
To install and set up an MPA 181T Mini Power Amplifier, follow these steps:
Step 1
Turn all of the equipment off and disconnect it from the power source.
Step 2
Mount the MPA 181T on a rack, under a desk, or on a projector, as illustrated below.
Step 3
Attach the speakers to the MPA 181T.
Extron
MPA 181
Rear Plate Mini Power
Amplifier
#8 Wood Screws (2 Plcs) Each Side
Rubber Pad
Extron
PMK 350
Above Projector
Mount Bracket
Extron Power Supply for MPA 181
Drill pilot holes — 3/32” (2.4mm) dia. 1/4” (6.3 mm) deep
Extron PMP 6”, 10“ or 12” Projector Mount Pole
Cable Access
Front Plate
Cover Sheet
Cable Access
Extron
UPB 25
Universal Projector
Mounting Bracket
Under Desk
Machine Screw (2 Plcs)
Each Side
Projector Mount
Projector
6" Deep Rack Shelf
Rack Mount
(2)
Step 4
Attach inputs to the MPA 181T unit and the audio source and/or projector. Ensure that the projector’s audio output is set to variable out. Multiple input options (RCA, 3.5 mm stereo input, or captive screw) can be used simultaneously; this results in audio mixing.
