Specifications — MPX 866 A (continued)
Audio output
Number/signal type | 6 stereo, balanced/unbalanced |
Connectors | (6) 3.5 mm captive screw connectors, 5 pole |
Impedance | 50 ohms unbalanced, 100 ohms balanced |
Gain error | ±0.1 dB channel to channel |
Maximum level | >+20 dBu, balanced or unbalanced at 1% THD+N |
Control/remote — switcher
Serial host control port | (2) |
| 1 front panel 2.5 mm stereo mini jack (in parallel with the rear panel secondary |
| port) |
Baud rate and protocol | 9600 baud; 8 data bits, 1 stop bit, no parity |
Serial control pin configurations | Captive screw connectors: 1 = TX, 2 = RX, 3 = GND |
| Mini stereo jack: tip = TX, ring = RX, sleeve = GND |
Ethernet host control port | 1 |
Ethernet data rate | |
Ethernet protocol | ARP, DHCP, ICMP (ping), TCP/IP, Telnet, HTTP, SMTP |
Default settings | Link speed and duplex level = autodetected |
| IP address = 192.168.254.254 |
| Subnet mask = 255.255.0.0 |
| Gateway = 0.0.0.0 |
| DHCP = off |
Web server | Up to 200 simultaneous sessions |
| 1 MB nonvolatile user memory |
Program control | Extron’s control/configuration program for Windows® |
| Extron’s Simple Instruction Set (SIS™) |
| Microsoft® Internet Explorer ver. 6 or higher, Telnet |
General
Power | 100 VAC to 240 VAC, 50/60 Hz, 15 watts, internal, autoswitchable |
Temperature/humidity | Storage: |
| Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing |
Rack mount | Yes |
Enclosure type | Metal |
Enclosure dimensions | 3.5" H x 17.0" W x 9.4" D (2U high, full rack wide) |
| 8.9 cm H x 43.2 cm W x 23.9 cm D |
| (Depth excludes connectors. Width excludes rack ears.) |
Product weight | 15 lbs (6.8 kg) |
Shipping weight | 25 lbs (12 kg) |
DIM weight | TBD |
Vibration | ISTA 1A in carton (International Safe Transit Association) |
Listings | UL, CUL |
Compliances | CE, FCC Class A, VCCI, AS/NZS, ICES |
MTBF | 30,000 hours |
Warranty | 3 years parts and labor |