Extron electronic MSW 4SV manual VersaTools MSW 4V & 4SV, cont’d Installation, Rack mounting

VersaTools® MSW 4V & 4SV, cont’d

Installation

The 1U high, quarter rack width, MSW 4V and MSW 4SV can be mounted on a rack shelf, mounted under a desk or tabletop, or mounted on a projector bracket.

Rack mounting

For optional rack mounting, mount the MSW on any of the following rack shelves:

•RSF 123 VersaTools 19" 1U rack shelf kit (part #60-190-20) (figure 2)

•RSB 123 VersaTools 19" basic 1U rack shelf (part #60-604-20)

•RSU 126 6" deep universal rack shelf kit (part #60-190-10)

•RSB 126 6" deep basic rack shelf (part #60-604-10)

•RSU 129 1U universal rack shelf kit (part #60-190-01) (figure 3)

•RSB 129 1U basic rack shelf (part #60-604-01)

On the standard rack shelf, the MTP mounts in one of four locations to the rear of the rack or in one of four locations to the front of the rack.

1.	If installed, remove the feet from the bottom of the MSW.
2.	Mount the MSW on the rack shelf, using two 4-40 x 3/16"
	screws in opposite (diagonal) corners to secure the MSW
	to the shelf.
3.	Install blank panel(s) or other unit(s) to the rack shelf.

Only products in the VersaTools line can be mounted to a VersaTools shelf. Most 1U rack-mountable Extron products can be mounted on the standard shelf.

1U Rack Shelf

1/4 Rack Width False Front

Face Plate

Use 2 mounting holes on
opposite corners	(2) 4-40 x 3/16" screws

Figure 2 — MSW mounted on a VersaTools rack shelf

Figure 3 — MSW mounted on a standard rack shelf

2	VersaTools	®	MSW 4V & 4SV • Installation	® ®	3
				VersaToolsVersaToolsMSWMSW4V &4V4SV& 4SV• Installation• and Connections