VersaTools® MSW 4V & 4SV, cont’d

Furniture mounting

Furniture mount the MSW using the optional MBU 123 VersaTools® under-desk mounting kit (part #70-212-01) as follows:

1.

If necessary, remove the feet from the bottom of the MSW.

2.

Attach the mounting brackets to the MSW with the

 

machine screws provided (figure 4).

 

AUTO

 

 

 

SWITCH MODE

NORMAL

 

 

1

 

 

 

2 AUTO

 

 

 

3

 

 

 

A/V

4

 

 

SWITCHER

 

 

 

Figure 4 — Furniture mounting the MSW

3.

Hold the MSW with the attached brackets against the

 

underside of the table or other furniture. Mark the

 

location of the screw holes of the bracket on the mounting

 

surface.

 

4.

Drill 3/32" (2 mm) diameter pilot holes, 1/4" (6.3 mm)

 

deep in the mounting surface at the marked screw

 

locations.

 

5.

Insert #8 wood screws into the four pilot holes. Tighten

 

each screw into the mounting surface until just less than

 

1/4" of the screw head protrudes.

6.

Align the mounting screws with the slots in the brackets

 

and place the MSW against the surface, with the screws

 

through the bracket slots.

7.

Slide the switcher slightly forward or back, then tighten all

 

four screws to secure the MSW in place.

Projector mounting

Projector mount the MSW using the optional PMK 100 (part #70-217-01), PMK 250 (part #70-562-02), or PMK 350 (part #70-563-02) under desk mounting kit.

For the PMK 250 or PMK 350, follow the instructions included with the kit (figure 5).

4VersaTools® MSW 4V & 4SV • Installation

Extron

Extron

PMK 250

Projector Mount Kit

MSW 4V

 

4

 

SWITCHER

 

3

2

A/V

1

 

Plastic Tie

 

Extron

Front Plate

Power Supply

 

Cover Sheet

Figure 5 — Projector mounting the MSW with a PMK 250

For the PMK 100, mount the MSW as follows:

1.

If necessary, remove the feet from the bottom of the MSW.

2.

Attach the mounting brackets to the MSW with the

 

machine screws provided (figure 6).

3.

Secure the MSW to a projector mount or other surface by

 

inserting the mounting bolt through the bracket’s slotted

 

hole.

PMK 100 Projector

Mounting

Bracket

Mounting

Bolt

Ceiling

Digital Projector

Projector Mounting

Figure 6 — Projector mounting the MSW with a PMK 100

® ®

5

VersaToolsVersaToolsMSWMSW4V &4V4SV& 4SV• Installation• and Connections

Page 7
Image 7
Extron electronic MSW 4SV manual VersaTools MSW 4V & 4SV, cont’d, Furniture mounting, Projector mounting