Extron electronic MSW 4SV manual VersaTools MSW 4V & 4SV, cont’d Specifications

VersaTools® MSW 4V & 4SV, cont’d

Specifications

Video

Gain	Unity
Bandwidth
MSW 4V	300 MHz (-3 dB)
MSW 4SV	250 MHz (-3 dB)
Crosstalk	<-60 dB @ 3.58 MHz
Switching speed	20 ms (max.)

Video input

Number/signal type
MSW 4V	4 composite video
MSW 4SV	4 S-video
Connectors
MSW 4V	4 female BNC
MSW 4SV	4 female 4-pin mini DIN
Nominal level	1 Vp-p for Y of S-video and for
	composite video
	0.3 Vp-p for C of S-video
Minimum/maximum levels	0.4 V to 2.0 Vp-p with no offset
Impedance	75 ohms
Return loss
MSW 4SV	<-25 dB, DC @ 10 MHz
MSW 4V	<-40 dB, DC @ 10 MHz
DC offset (max. allowable)	5.0 V
Input coupling	DC

Video output

Number/signal type
MSW 4V	2 composite video
MSW 4SV	1 S-video, 1 composite video
Connectors
MSW 4SV	1 BNC female, (1) 4-pin mini DIN female
MSW 4V	2 BNC female
Nominal level	1 Vp-p for Y of S-video and for
	composite video
	0.3 Vp-p for C of S-video
Minimum/maximum levels	0.4 V to 2.0 Vp-p
Impedance	75 ohms
Return loss	<-30 dB @ 5 MHz
DC offset	±5 mV maximum with input at 0 offset
Switching type	Vertical interval

Sync

Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM

Control/remote — switcher

Contact closure	(1) 3.5 mm captive screw connector, 5 pole
Contact closure pin configurations	See switcher’s panel.

General

External power supply	100 VAC to 240 VAC, 50/60 Hz, external,
	autoswitchable; to 12 VDC, regulated
Power input requirements	2.4 watts, 12 VDC, 0.2 A
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) /
	10% to 90%, noncondensing
	Operating: +32 to +122 °F (0 to +50 °C) /
	10% to 90%, noncondensing
Rack mount	Yes, with optional RSU 129 or RSB 129
	1U rack shelf, part #60-190-01or 60-604-01;
	RSU 126 or RSB 126 6" deep rack shelf,
	part #60-190-10 or 60-604-10; or the
	VersaTools® RSF 123 or RSB 123 rack shelf,
	part #60-190-20 or 60-604-20.
	Also furniture mountable with optional
	MBU 123 Mini Under-Desk Mounting Kit,
	part #70-212-01; or projector mountable
	with optional PMK 100 (part #70-217-01),
	PMK 250 (part #70-562-02), or PMK 300
	(part #70-563-02) projector mounting kit

10	®	®	®	®	&4V4SV& 4SV• Installation• Specificationsand Connections	11
	VersaToolsVersaToolsMSW 4V & MSW4SV• 4VInstallation& 4SV • Specifications		VersaToolsVersaToolsMSWMSW4V