Extron electronic P/S 100 Description, Installation, Rear Panel Connections, Indications

Installation

Description

The Extron P/S 100 is a 12VDC 2.0 A universal power supply with ten separate outputs on two 10-connector, 3.5mm captive screw connectors. The outputs are rated at 12V, 200 mA each. The universal power supply can power up to ten devices that require 12VDC external power, such as some Extron interfaces and products in the VersaTools™ line of basic distribution amplifiers, switchers, and associated video accessories.

The rack mountable P/S 100 has an internal auto-switchable power supply that can accept 100VAC to 240VAC at 50 Hz to 60 Hz.

Installation

For optional rack mounting, mount up to four P/S 100s on a 19" 1U Universal Rack Shelf (Extron part #60-190-01) (figure 1).

Quarter Rack Width

False Front Panel

Half rack width false front panel uses 2 front holes

			(2) 4-40 x 3/16" screws
			Use 2 mounting holes
	P/S	100	on opposite corners
Figure 1 — Rack mounting the P/S 100
1.	Mount the P/S 100 on the rack shelf, using two 4-40 x 3/16”
	screws in opposite (diagonal) corners.
2.	If necessary, mount the half rack width false front panel
	(included with the Universal Rack Shelf) and/or the quarter

rack width false front panel (included with the P/S 100) to the shelf, using two 4-40 x 3/16” screws in the front holes for each panel.

Rear Panel Connections

1Connect the power cables from the various devices that will receive power from the P/S 100 to the 3.5mm captive screw connectors (included) (figure 2).

		5				4
					POWER-GREEN
	100-240V -			OVERLOAD-AMBER
2				CHANNEL OVERLOAD
	1	2	3	4	5	6	7	8	9	10
	50/60 Hz 0.9 A MAX		12 VDC OUTPUT 200 mA PER CHANNEL

1

3

P/S 100

12 VDC POWER SUPPLY

Figure 2 — P/S 100 front and rear panels

Each captive screw connector has ten poles and can support up to five power supply outputs (figure 3).

	1
		2
	- wire	3
		4
+ wire		5
Power connector
plastic cover	- wire
		Up to 5 power
	+ wire
		supply outputs

Figure 3 — Connecting power cables to P/S 100

2Plug in the P/S 100.

Indications

3Power LED — This front panel LED (figure 3) lights to indicate that the P/S 100 is receiving power.

4Power/Overload LED — This rear panel LED lights green when power is applied and is normal, and lights amber

2 P/S 100 • Installation P/S 100 • Indications 3