Extron electronic PCM 240 Specifications, ’s and Dimensions, Attaching a projector mounting pole

Models: PCM 240

1 10
Download 10 pages 11.64 Kb
Page 8
Image 8
Attaching a projector mounting pole

Installation, cont’d

Attaching a projector mounting pole

The PCM 240 comes with a threaded pipe adapter installed in the adapter plate. This allows for an Extron PMP projector mounting pole (supplied separately) to be fitted.

To fit the mounting pole do the following:

1.Screw the pole into the adapter.

2.Secure the pole in place with the locking screw on the pipe adapter/adapter plate assembly. Cabling for the projector may be accessed through the convenient cut-out in the PMP pole.

Other optional accessories may also be installed at this point. These include Extron’s PMK 350, a low profile two product mounting kit, and the UPB 25, a Universal Projector Mounting Bracket suitable for most projectors weighing up to 25 pounds. See page 3 for more details. Follow the installation instructions supplied with the accessory.

W.The combined weight of the installation MUST NOT exceed a maximum of 50 pounds (23 kgs).

Attaching Extron devices and electrical boxes

The PCM 240 comes with two cutout holes where a RACO box (#8471), an MK box, or standard UL electrical boxes can be inserted. Mounting holes for Extron 3" deep, ¼ rack wide devices are also included (see figure 9 for all location). Follow any mounting instructions supplied with the devices or boxes.

CUsing flex conduit is recommended when installing any power wiring

3" Deep, ¼ Rack

Device Mounting Holes

1-gang and 2-gang Electrical Box Cutouts

Raco and MK Box cutout

Figure 9 — Locations for device and electrical box installation on the PCM 240

10PCM 240 Projector Ceiling Mount • Installation

Specifications, Part #’s and Dimensions

 

General

 

 

Rack mount

No, but ceiling mount

 

Enclosure type

14 gauge steel/powder coated white

Plate dimensions

25.8" L x 8.0" W x 1.2" D

 

 

65.5 cm L x 20.3 cm W x 2.9 cm D

 

Shipping weight

9 lbs (4.1 kg)

 

Vibration

ISTA 1A in carton

 

 

(International Safe Transit Association)

Warranty

3 years parts and labor

 

Parts and accessories

 

 

PCM 240 kit contents

 

 

Item

Quantity

Projector Mounting Platform

1

Pipe adapter

 

1

Pipe adapter plate

 

1

Turnbuckles

 

4

Anchors, for concrete ceiling (4) and safety cable (1)

5

Eye screws, for wood joists (4) and safety cable (1)

5

Tie wire, 60 ft

 

1

Safety cable, 15 ft

 

1

Cable clamps, for safety cable

2

Locking screws, for T-bar (4)

4

Anti-vibration adhesive pads

4

Installation manual

 

1

See page 12 for Optional accessories

 

PCM 240 Projector Ceiling Mount • Specifications

11

Page 8
Image 8
Extron electronic PCM 240 manual Specifications, ’s and Dimensions, Attaching a projector mounting pole, General, Quantity