2. Setting up the monitor
2. Setting up the monitor
2.1 Installation
Package contents
AC/DC Adapter
Audio cable (optional) | VGA (optional) |
| |
Cable management | DVI (optional) |
Warning
•Use only the AC/DC adapter supplied with product by Philips. ADPC1945(234E5QHSB/QHSW), ADPC1965(234E5QHAB/QHAW/QDAB),
•For 234E5QSB product , refer to the elec- tric voltage information on the rating label before using the adapter.
ADPC1945 for 234E5QSB of version A (S/N code change)
ADPC1236 for 234E5QSB of version B (S/N code change)
Do not rip off panel film
Install base stand
1.Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen.
2.Hold the base stand with both hands and firmly insert the base stand into the base column.
(1)Gently attach the base to the base column until the latch locks the base.
(2)Use your fingers to tighten the screw located at the bottom of the base, and secure the base to the column tightly.
2
1
4
