![](/images/new-backgrounds/1033256/3325679x1.webp)
Using the QGE 100 Viewer Program
The QGE 100 Viewer software displays QGE 100 sources on your viewing computer. It can display one source at a time.
Starting the Viewer Program
For you to start using the QGE 100 Viewer software, the
1.With the QGE 100 powered on, open the Viewer program by doing either of the following:
•
•On your desktop, click Start > All Programs > Extron Electronics > QGE 100 > QGE 100 Viewer > QGE 100 Viewer.
The QGE 100 Viewer software searches the network for any available QGE 100s. (This may take several seconds, depending on the number of QGEs that are available.) When the search is complete, the main Viewer window opens, displaying the selected source (if one is connected) and a list of the QGE100s that were detected on the network.
TIP: To ensure that
on the toolbar at the top of this window.
NOTE: QGEs on different subnets must be manually added to the list using the
Add QGE 100 option on the Connection menu (see “Adding QGEs to the list” on page 26).
2.From the Channel list (right pane of the window), connect to one of the listed QGEs by doing one of the following:
•Click on its name to highlight it, then click the Connect button on the toolbar.
•Click on the QGE name, then select Connect from the Connection
•
See “Connecting to a QGE 100 Source” on page 38 for more information.
The source connected to the selected QGE is displayed in the Source Window (left pane). If the source does not appear, click the Refresh button on the toolbar.
QGE 100 • Software Configuration and Control | 34 |