The QGE 100 Viewer Window
Figure 26. QGE 100 Viewer Main Window
The main window of the QGE 100 Viewer consists of the following major sections:
•Source window — (Left pane) Displays the source connected to the selected
QGE 100. If no source is connected, this section displays Not Connected.
•Channel list — (Right pane) Displays all QGE 100s available on the network. The following parameters are displayed for each QGE:
Parameter | Description |
|
|
|
|
QGE 100 | Name of the QGE 100 (if assigned) |
|
|
IP Address | IP address of the QGE |
Type | This field always displays Hardware. |
|
|
Protocol | Current operating mode (TCP Unicast or UDP Multicast) |
|
|
Multicast Group | (Multicast mode only) The multicast IP address currently set |
|
|
Port | The port number for multicast connection. This is normally |
| set to 5000, which is the default value expected by the |
| QGE 100 Viewer and |
|
|
QGE 100 • Software Configuration and Control | 35 |
