Extron electronic QGE 100 manual Field To enter a value, From the Special Context menu

2.Enter any desired values in the fields as described in the table below:

Field	To enter a value:
Key Combination to End	Click in this field, then press the key or key
Mouse & Keyboard Input	combination that will be used to terminate the
	current mouse and keyboard control session.
	Default: <Ctrl> + <F1>
	NOTE: Pressing this key combination does not
	disable keyboard and mouse control
	entirely. The option remains checked
	on the Tools menu, and if you click
	anywhere on the Administrator Viewer
	window or the QGE 100 Viewer source
	pane, keyboard and mouse control is
	reestablished.
	(You can also select End Keyboard And Mouse
	from the Special Context menu.)
Key Combination to Show	Click in this field, then press the key or key
Mouse & Keyboard Context	combination that will be used to display the
Menu	Special Context pop-up menu.
	From this menu you can select special commands
	to send to the source computer, or end mouse
	and keyboard control. Default: <Ctrl> + <F2>
Enable Timeout	Select this check box to enable automatic
	termination of a keyboard and mouse control
	session after a specified number of seconds.
Timeout in Seconds	If the Enable Timeout check box has been
	selected, enter the number of seconds after
	which mouse and keyboard control of the source
	computer will time out.

3.Click OK to close the Mouse and Keyboard Options dialog and implement the settings.

QGE 100 • Software Configuration and Control 42