Connecting audio, Unbalanced audio | Extron electronic RGB 109XI

Controls and Installation, cont’d

2.Connect the interface cable marked “Video input” to the computer’s video output (where the monitor was originally connected).

3.Connect the audio cable connector on the interface cable to the computer’s audio line output (where the powered speakers were originally connected).

4.Use BNC cables to attach the interface to a projector or other display device.

RGsB – If coax cables are connected and terminated (75 ohms)

R	G	B	to the red, green, and blue channels only, and the
H	V	S	SOG switch is set to On (see page 2-4), the output
			is sync on green.

RGsB

RGBS – If the S (composite sync) cable is connected, the output

R	G	B is composite sync.
H	V	S

RGBS

RGBHV – If both the H & V cables are connected, the sync

R G B output is separate horizontal and vertical.

HVS

RGBHV

Connecting audio

Before connecting audio, determine whether your audio system is unbalanced or balanced. Then, follow the instructions on page 2-12 or 2-13, to connect unbalanced or balanced audio.

CAUTION Wiring the audio incorrectly may damage the audio output circuits.

Unbalanced audio

To attach the interface to an unbalanced audio system, do the following:

1.Attach the audio cable to an unbalanced speaker input connector (tip and sleeve).

Tip Sleeve

2.Attach the audio cable to the captive screw connector (Extron part number 10-319-10) as shown below. Fasten down the captive screws inside the audio cable connector.

Unbalanced Output

Tip

See Warning

Sleeve (s)

Tip

See Warning

CAUTION Connect the sleeve(s) to ground (GND). Connecting the sleeve(s) to a negative (-) terminal will damage audio output circuits.

3.Slide the audio cable connector into the audio output connector on the interface.

Balanced audio

To attach the interface to a balanced audio system, do the following:

1.Attach the audio cable to a balanced speaker input connector (tip, ring, and sleeve).

Tip (+)

Sleeve

Ring (-)

Tip (+)

Sleeve

2.Attach the audio cable to the captive screw connector (Extron part number 10-319-10) as shown below. Fasten the captive screws inside the audio cable connector.

Balanced Output

Tip

Ring

Sleeve (s)

Tip

Ring

3.Slide the audio cable connector into the audio output connector on the interface.

2-12 RGB 109xi and RGB 112xi • Installation

RGB 109xi and RGB 112xi • Installation 2-13

RGB 112XI, RGB 109XI specifications

Extron Electronics is renowned for its innovative solutions in the field of AV processing, and one prominent product in their lineup is the RGB 112XI. This versatile device serves as a high-performance VGA (Video Graphics Array) video processing unit designed to facilitate seamless integration into a variety of audiovisual setups.

One of the standout features of the RGB 112XI is its capability to support both RGBHV and component video signals. This flexibility allows it to accommodate a broad range of sources, making it an ideal choice for installations that utilize different types of video signals. The unit also supports resolutions up to 1920x1200, ensuring compatibility with modern high-resolution displays and projectors.

The RGB 112XI employs advanced technologies to enhance video quality. With Extron’s award-winning True 3D technology, users can expect exceptional image fidelity. This technology processes each individual pixel to provide sharp, vibrant images, making it perfect for critical viewing environments such as control rooms, lecture halls, and conference facilities.

Another significant feature is its high bandwidth capability, which allows for the transmission of video signals without degradation, ensuring images remain crisp and clear even over extended distances. The RGB 112XI also includes built-in scaling functions that allow it to adapt different input resolutions to match the output requirements seamlessly.

In terms of usability, the RGB 112XI is equipped with intuitive controls that enable users to adjust settings easily. This is particularly beneficial in dynamic environments where quick changes may be necessary. Additionally, it includes graphical user interfaces that allow for straightforward management of video inputs and outputs.

Furthermore, the RGB 112XI offers reliable signal routing with an integrated switching system that can handle multiple inputs and outputs, making it a robust solution for sophisticated AV setups. Coupled with its compact design, the device can be effortlessly incorporated into existing systems without taking up too much space.

Overall, the Extron RGB 112XI is an essential piece of equipment in any professional audiovisual arrangement. With its advanced features, flexibility in supporting various signal types, and outstanding image quality, it stands out as a reliable tool for delivering exceptional visual experiences.

Extron electronic RGB 109XI, RGB 112XI Connecting audio, Unbalanced audio, Balanced audio

Models: RGB 112XI RGB 109XI