Extron electronic RGB 109XI Reference Information, Specifications, Video input, Video throughput

Reference Information

Specifications

Specifications apply equally to both units, except where noted.

Video input

Number/type	1 analog RGBHV, RGBS, RGsB, RsGsBs
Connectors	RGB 109xi: 1 15-pin HD male, 48"
	(122 cm) long cable
	RGB 112xi: 1 13W3 male, 48" (122 cm)
	long cable
Nominal level(s)	Analog — 0.3 V to 1.5 Vp-p
Maximum level(s)	Analog — 1.5 Vp-p
Impedance	75 ohms
Horizontal frequency	Autoscan 15 kHz to 130 kHz
Vertical frequency	Autoscan 30 Hz to 120 Hz
Return loss	-30 dB @ 5 MHz
Maximum DC offset	4.0 V

Video throughput

Gain	Unity, 0.725 Vp-p with 50% peaking,
	0.750 Vp-p with 100% peaking
Bandwidth	300 MHz (-3 dB)

Video output

Number/type/format	1 analog RGBHV, RGBS, RGsB
Connectors	6 BNC female
	RGB 109xi: 1 15-pin HD female local
	monitor output (buffered)
	RGB 112xi: 1 13W3 female local monitor
	output (buffered)
Nominal level	Analog 0.70 Vp-p, 0.725 Vp-p, or
	0.750 Vp-p
Impedance	75 ohms
Return loss	-30 dB @ 5 MHz

Sync

Input type	RGBHV TTL (±), RGBS TTL (±),
	RGsB 0.3V (-), RsGsBs 1.3V (-)
Output type	RGBHV (±), RGBS(±), RGsB (-)
Input level	2.0 V to 5.5	Vp-p with ±0.2 VDC offset
	(max.)
Output level	4.0 V to 5.0	Vp-p

Input impedance	10 kohms
Output impedance	75 ohms
Max. propagation delay	48 ns
Max. rise/fall time	3.5 ns
Polarity	RGBHV: when RGBHV is input, polarity
	follows input; otherwise negative
	RGBS, RGsB: negative

Audio input

Number/type	1 PC level stereo, unbalanced
Connectors	1 3.5 mm stereo plug, 24" (61 cm) cable
	from computer video connector, 2 channel;
	tip (L), ring (R), sleeve (ground)
Impedance	10 kohms, DC coupled
Minimum level	100 mV
Maximum level	+8.5 dBu,.....(unbalanced) @ stated
	%THD+N

Audio throughput

Gain	Unbalanced 0 dB, balanced +6 dB
Frequency response	±0.05 dB 20 Hz to 20 kHz
THD + Noise	0.03% @1 kHz, 0.3% @ 20 kHz at rated
	maximum output drive
S/N	>90 dB, output 14 dBu, balanced
Stereo channel separation	>95 dB @ 1 kHz to 20 kHz

Audio output

Number/type	1 stereo (2 channel), balanced/unbalanced
Connectors	3.5 mm stereo captive screw terminal,
	5 conductor, for left and right output
Impedance	50 ohms, unbalanced, 100 ohms balanced
Gain error	±0.1 dB channel to channel
Drive (600 ohm)	> +14 dBu, balanced at stated %THD+N

General

Power	100 VAC to 240 VAC, 50/60 Hz, 15 Watts,
	internal, auto-switchable
Temperature/humidity	Storage -40° to +158°F (-40° to +70°C) /
	10% to 90%, non-condensing
	Operating +32° to +104°F (0° to +40°C) /
	10% to 90%, non-condensing
Rack mount	No

A-2 RGB 109xi and RGB 112xi • Reference Information RGB 109xi and RGB 112xi • Reference Information A-3