Installation, cont’d
4. For the
4. Mount the faceplate to the knockout box. |
a. For the RGB 460xi |
RGB 472xi |
the bottom of the faceplate into the slots on the |
MONITOR NO
MONITOR
| H. | SHIFT |
MONITOR |
|
|
|
| MIN/MAX |
INPUT |
|
|
AUDIO |
| ADSP |
| WITH | |
| 460xi |
|
RGB |
|
|
bottom of the box is mounted. Secure the faceplate to |
the top of the floorbox with the included |
machine screw (figure 3). |
Locking Tabs
in Slots
Figure 2 — Securing the device to the face plate, SC-AFM8 only
5. Set the gain and DIP switches (or the switch(es) on the device(s) to be installed in the
Mounting the faceplate to the floorbox
1.Disconnect the power supply to remove power from the interface (or the device connected to the
2. If installed, remove the floor box’s top panel and trim frame.
3.Place the faceplate through the opening in the floor and into the floorbox. Take care not to damage the cables, which lay behind the interface in the bottom of the box.
Figure 3 — RGB 460xi SC-AFM2 installed
b. For the RGB 460xi
RGB 468xi
c. For the
4 | RGB 460xi/470xi SC Series • Installation Guide | RGB 460xi/470xi SC Series • Installation Guide | 5 |