![Video](/images/new-backgrounds/15551/155511x1.webp)
Specifications — SVDA 6 A MX Distribution Amplifier
Video
Gain | Unity |
Bandwidth | 30 MHz |
Frequency response | < ± 0.1 dB @ 15 MHz |
Differential phase error | 0.03° at 3.58 MHz and 4.43 MHz |
Differential gain error | 0.05% at 3.58 MHz and 4.43 MHz |
Crosstalk |
Video input
Number/signal type | 1 |
Connectors | (1) |
Nominal level | 1 |
| 0.3 |
Minimum/maximum levels | Analog: 0.4 V to 1.4 |
Impedance | 75 ohms |
Return loss |
Video output
Number/signal type | 6 |
Connectors | (6) |
Nominal level | 1 |
| 0.3 |
Minimum/maximum levels | 0.4 V to 1.4 |
Impedance | 75 ohms |
Return loss | |
DC offset | ±5 mV with input at 0 offset |
Sync
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio
Gain | Unbalanced output: 0 dB; balanced output: +6 dB |
Frequency response | 20 Hz to 20 kHz, ±0.05 dB |
THD + Noise | 0.03% @ 1 kHz at nominal level |
S/N | >90 dB, output 21 dB, balanced, at maximum output (unweighted) |
Stereo channel separation | >80 dB @ 1 kHz; >60 dB @ 20 kHz |
CMRR | >75 dB @ 20 Hz to 20 kHz |
Audio input
Number/signal type | 1, 2, or 4 stereo balanced (Hi Z or 600 ohms), unbalanced (Hi Z) | |
Connectors | (1, 2, or 4) 3.5 mm captive screw connector, 5 pole | |
Impedance | >25k ohms balanced, 50k ohms unbalanced, DC coupled | |
Maximum level | +24 dBu (balanced or unbalanced) at 1%THD+N | |
| 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu | |
| ||
|
|
|
Audio output
Number/signal type | 6, 12, or 24 stereo, balanced/unbalanced |
Connectors | (6, 12, or 24) 3.5 mm captive screw connector, 5 pole |
Impedance | 50 ohms unbalanced, 100 ohms balanced |
Gain error | ±0.1 dB channel to channel |
Maximum level | >+24 dBu, balanced or unbalanced at 1%THD+N |
Maximum level (600 ohm) | >+15 dBm, balanced or unbalanced at 1%THD+N |