Product Specifications
XES Synergix 8825/8830 Printer
Electrical Specifications
105 - 125 VAC (Nominal 60 Hz)
210 - 225 VAC (Nominal 50 Hz)
20 Amp dedicated circuit
Power Consumption
120 Watts: (Power Saver Mode)
1000 Watts (heaters on - standby)
690 Watts (Ready Mode)
1840 Watts (running)
Heat Dissipation
6,270 BTU (running)
Environmental Requirements
Temperature: | 60° F (10° C) to 80° F |
(27° C) |
|
Humidity: | 20% to 80% Relative |
Humidity | |
Maximum Elevation: | 7000 feet (2133 m) |
above sea level
XES Synergix 8825/8830 Printer Operator Manual | 40 |
Media Specifications: | Audible Noise |
Media Type: | 67 dBA) Maximum |
Bond (20 lb.) | . |
Vellum (20 lb.) |
|
Film (4 mil.) |
|
Tracing (4 mil) |
|
Media Size: |
|
Roll Feed - 11 inches to 36 inches (279.4 mm to
914.4mm) width (3 (76.2 mm) inches core diameter to 6.7 inches (170.2 mm) O.D.) (Roll 2 is optional for the 8825, Roll 3 is not available for the 8825).
Manual Bypass Feed (optional for the 8825) - 11 inch to 36 inch (279.4 mm to 914.4 mm)
Print Size:
Minimum Cut Sheet - 8.5 X 11 inches (216 mm x 279 mm)
Minimum Roll Feed - 11 X 8.5 inches (279 mm x 216 mm)
Maximum Length - 48ft, (15.2 m) (Standard with the 8825/8830 Controller) 80 ft (24.4 m) (Optional)
