OFF-LINE MENUS
Printer Menu - Diagnostics
DIAGNOSTICS |
<TEST PLOT> |
1.When DIAGNOSTICS is displayed on the Control Panel, press the Enter button to display the first feature.
2.Press the Enter button to select the <TEST PLOT> feature.
XES Synergix 8825/8830 Printer Operator Manual | 26 |
TEST PLOT |
PRINT FROM <ROLL x> |
3.Press the Next (or Previous) button in order to scroll through the available settings (Roll 1, Roll 2 (Optional for the 8825), Roll 3 (Not available for the 8825), BYPASS (Optional for the 8825).
4.Press the Enter button in order to enter your selection, or
press Exit if no change is required.
5. Press the Exit button in order to return to the DIAGNOSTICS submenu.
NOTE: There are two other features in the submenu that are reserved for the Service Representative. The diagnostic feature is protected by a password.
