MEDIA INFORMATION
Loading the Rolls of Media
A
12.If the lead edge of the roll is torn or uneven, trim off the lead edge of the media.
NOTE: Trimming is usually not necessary for a new roll of media.
13.Squeeze the two knobs on the Baffle and lift up to open the Baffle.
14.Rotate the media roll to feed the media under the Baffle and beyond the registration window
(A).
NOTE: Ensure that the lead edge of the media is flat and is not folded over itself.
15.Squeeze the two knobs on the Baffle and lower the Baffle into place.
16.Center the lead edge of the media in the registration window.
XES Synergix 8825/8830 Printer Operator Manual | 13 |
