XES Synergix 8825/8830 Printer Operator Manual | 2 |
SAFETY NOTES
Your Printer has been designed and tested to meet strict safety requirements. These include safety agency examination and approval and compliance with established environmental standards.
Please read the following instructions carefully before operating the Printer and refer to them as needed to ensure the continued safe operation of your printer.
Follow all warnings and instructions that are marked on or supplied with the product.
Unplug the printer from the wall outlet before cleaning the exterior. Always use materials specifically designated for the Printer. Use of other materials may result in poor performance and could create a hazardous situation.
Do not use aerosol cleaners. Follow the instructions in this operator manual for the correct cleaning methods.
Never use supplies or cleaning materials for purposes other than what they were intended. Keep all supplies and materials out of the reach of children.
Do not use this product near water, wet locations, or outdoors.
This product is equipped with a
Never use a ground adapter plug to connect the printer to a power source that lacks a ground connection terminal.
This product should be operated from the type of power source that is indicated on the label. If you are not sure of the type of power available, consult your local power company.
The power supply cord is the disconnecting device for this equipment. Make sure that the installation is near the socket outlet and is easily accessible.
Do not allow anything to rest on the power cord. Do not locate the printer where someone will step on the cord.
(continued)
