Xerox manual Manual Bypass Feed, XES Synergix 8825/8830 Printer Operator Manual

XES Synergix 8825/8830 Printer Operator Manual 18

MANUAL BYPASS FEED

The Manual Bypass Feed is standard equipment for the 8830. The Manual Bypass Feed is optional equipment for the 8825

•When the correct media is not loaded for an incoming print job, you may manually bypass the media drawers and load cut-sheet media of the required size on the Cut Sheet Feed-In Shelf.

•Minimum size is 8.5 X 11 inch (A4) fed Short-Edge-Feed (SEF).

B

1.Raise the Output Tray (A) up and out of the way.

2.Center the media between the size indicators on the Cut Sheet Feed-In Shelf (B).

3.Feed the lead edge of the media squarely into the printer until the media stops.