CARE
Required Tasks | Calling for Service |
Perform the following tasks, as required:
CAUTION
Toner identified for use in the XES Synergix 8825/8830 Printer is a
•Replace the Toner Waste Bottle each time a new Toner Cartridge is installed. Refer to Replacing the Toner Cartridge in this section of the operator manual.
CAUTION
Do not reuse the contents of the Toner Waste Bottle. Reuse of this material will cause damage to the printer.
•Empty the water periodically from the collection bottle located inside the Front Door of the printer.
•Clean the outside surfaces of the printer, using a cleaning cloth dampened with mild soap and water. Do not pour or spray liquid directly on to any part of the printer.
A
When a Status Code appears on the Message Display and the problem that caused it is not cleared by following the instructions shown on the Message Display, call for service after first taking the following steps:
1.Write down the Status Code and any message on the Message Display, note any flashing LED indicators, and a brief description of the problem.
2.The Serial Number (A) can be found inside the front cover of this manual, or open the Front Door of the printer and refer to the illustration above to locate and write down the serial number.
3.If print quality is the problem, take a print sample to the phone with you in order to help in describing the problem.
4.Refer to the inside of the front cover of this manual for the local number to call for service.
XES Synergix 8825/8830 Printer Operator Manual | 37 |
