MEDIA INFORMATION
Loading the Rolls of Media
A
A
1
2
3
Note: Load media in the drawers before switching on the power or after the printer is ready to print.
1.Raise the output tray (A) if necessary and then lift the handle in order to pull out the Media Roll Drawer 1, 2 (Optional on 8825), or 3 (Not available 0n 8825).
2.Squeeze the two knobs (A) together in order to release the latch.
3.Rotate the roll to rewind the remaining media onto the roll.
4. Lift out the used roll of media.
5.Stand the roll assembly on end.
6.Squeeze the lever at the end of the Media Roll Support Tube and remove the tube from the used roll of media.
XES Synergix 8825/8830 Printer Operator Manual | 11 |
