Extron electronic SYSTEM 8/10 PLUS Hughes Installation, Configuration and Connections, Page

Hughes Installation Configuration and Connections

System 8/10 Plus to Hughes-JVC DILA Projector Connections (RS-232)

Use the illustration below as a guide when connecting the System 8/10 Plus to the Hughes-JVC DILA projector. Refer to projector documentation to continue the installation.

S-Video Adapter

COMPUTER IN-2

AUDIO

PC

COMPUTER IN-2

AUDIO

R

GH/Cs

BV

Y/CVIDEO

AUDIO

L Y

R PB /B-Y

PR /R-Y

AV IN

9-Pin Female

CommAdapter 26-467-01

COMPUTER	CONTROL
OUT

REMOTE AUDIO OUT

RS - 232C

Composite

Video

RGBHV 5 BNC	15-Pin	S-Video
	Male

________ When RS-232 control of the projector is used, the projector’s IR remote can be

	used. However, because the projector’s IR remote does not communicate with
	the System 8/10 Plus switcher, the projector and switcher can become out-of-
	sync if the projector’s IR remote is used to change the projector’s input, picture
	mute or power settings. Should this occur, press the power, mute or channel
	buttons on the switcher to allow the projector and switcher to resynchronize.
________	If the installation includes looping (master/slave) switchers, see Chapter 5 of the
	System 8/10 Plus User’s Manual.
________	If Video Loop Back is part of the installation, refer to pages 2-10 and 2-11.

Extron • System 8/10 PLUS • User’s Manual • P/N 68-412-01 Rev. A Page 2