GMK-1 • Setup Guide (Continued)

Mounting the SMB 1 on the GMK 1

6. Align the four holes on the back of the SMB 1 with the

6Mounting Nuts (4)

four studs on the GMK 1. Secure the SMB 1 to the

GMK 1 using the four provided nuts. Do not overtighten

the nuts.

ATTENTION: The SMB 1 must be mounted so that the touchpanel faces upwards and the cutout for the cable is at the bottom.

Installing the Touchpanel in the SMB 1

7Mounting Screws (4)

Wall Plate Adapter

GMK 1

Mounting Plate

SMB 1

7.Secure the wall plate adapter to the SMB 1, using the four provided screws.

8.Run cables through the cable cutout and connect them to the back panel of the touchpanel (see the TLP Pro 320M User Guide or the TLP Pro 520M User Guide at www.extron.com).

If required, mount an adhesive raceway (not provided) to run the cable (see the figure below).

9.Press the touchpanel onto the wall plate adapter. Four catches hold it in place.

10.If the bezel has been removed, snap it back into place.

NOTE: The bezel for the touchpanels can be removed using the

provided Extron removal tool.

9

TLP Pro 520M

8

Cable Raceway (not included)

Extron Headquarters

 

Extron Europe

Extron Asia

Extron Japan

Extron China

Extron Middle East

Extron Korea

Extron India

+1.800.633.9876 (Inside USA/Canada Only)

+800.3987.6673

+65.6383.4400

+81.3.3511.7655

+86.21.3760.1568

+971.4.299.1800

+82.2.3444.1571

1800.3070.3777

Extron USA - West

Extron USA - East

(Inside Europe Only)

+65.6383.4664 FAX

+81.3.3511.7656 FAX

+86.21.3760.1566 FAX

+971.4.299.1880 FAX

+82.2.3444.1575 FAX

Inside India Only

+1.714.491.1500

+1.919.850.1000

+31.33.453.4040

 

 

 

 

 

+91.80.3055.3777

+1.714.491.1517 FAX

+1.919.850.1001 FAX

+31.33.453.4050 FAX

 

 

 

 

 

+91.80.3055.3737 FAX

 

 

 

 

 

 

 

 

 

© 2014 Extron Electronics All rights reserved. www.extron.com

68-2296-01 A

2

02 14

 

Page 2
Image 2
Extron electronic TLP PRO 520M GMK-1 Setup Guide, Mounting the SMB 1 on the GMK, Installing the Touchpanel in the SMB