TOOLS NEEDED FOR INSTALLATION

Saber Saw or Jig Saw

Drill

1 1/4" Wood Drill Bit

Scissors

Pliers

Phillips Screwdriver

Flat Blade Screwdriver

Wire Stripper or Utility Knife

Metal Snips

Measuring Tape or Ruler

Level

Pencil

Caulking Gun

Duct Tape

PARTS SUPPLIED FOR INSTALLATION

1 Hardware Package

1 Literature Package

PARTS NEEDED FOR INSTALLATION

2 Conduit Connectors

Power Supply Cable

1 Wall or Roof Cap

All Metal Ductwork

OPTIONAL ACCESSORIES AVAILABLE

Backsplash

Choose either 24" or 30" high, mounts to the wall beneath the rangehood for a coordinated look 30" X 24" high part # 6098835 - Stainless

36" X 24" high part # 6098815 - Stainless 30" X 30" high part # 620000095 - Stainless 36" X 30" high part # 620000096- Stainless

High Ceiling Chimney Kit

One 40" upper chimney to replace 16 1/8" upper chimney that came with hood

part # 620000071 - Stainless

*Ductless Conversion Kit For non-vented installations only

* it is highly recommended that professional style cooking always be vented to the outside

part #620000072 - Stainless

Replacement Charcoal Filter

For non-vented installations only, replace charcoal filter as needed part # 620000041

!WARNING

PERSONAL INJURY HAZARD

Becauseoftheweightandsizeoftherangehood canopy,twoormorepeopleareneededtomove and safely install the rangehood canopy.

Failure to properly lift rangehood could result in damage to the product or personal injury.

PLAN THE INSTALLATION

This rangehood can be installed as either ducted or ductless. The blower can be vented through the wall or ceiling. To vent through a wall, a 90° elbow is used. When installed ductless, the rangehood vents out of grates on the sides of the chimney. Ductless installations require a Ductless Conversion Kit, available from your dealer.

WARNING! BEFORE MAKINGANYCUTS OR HOLES FOR INSTALLATION, DETERMINE WHICH VENTING METHOD WILLBE USEDAND CAREFULLY CALCULATE ALL MEASUREMENTS.

RANGEHOOD COMPONENTS

A. CANOPY SECTION

B. LOWER CHIMNEY COVER

C. UPPER CHIMNEY COVER

D. MOUNTING SCREWS

E. CHIMNEY MOUNTING

BRACKETS

F. MOUNTING PLUGS

G. CHIMNEY SCREWS

H. DAMPER

FIGURE 1

CALCULATE THE DUCTRUN LENGTH

The ductrun should not exceed 35 equivalent feet if ducted with the required minimum of 6" round duct. Calculate the length of the ductwork by adding the equivalent feet in FIGURE 2 for each piece of duct in the system. An example is given in FIGURE 3.

45˚ Elbow

3.0 feet

 

9

Feet Straight Duct

 

9.0 feet

90˚ Elbow

5.0 feet

 

2

- 90˚ Elbows

10.0 feet

90˚ Flat Elbow

12.0 feet

 

Wall Cap

 

0.0 feet

Wall Cap

0.0 feet

 

Total System

 

19.0 feet

 

FIGURE 2

 

 

 

FIGURE 3

 

 

 

For best results, use no more than three 90° elbows. Make sure that there is a minimum of 24" of straight duct between elbows if more than one is used. Do not install two elbows together. If you must elbow right away, do it as far away from the hood's exhaust opening as possible.

Version 12/04 - Page 4

Page 4
Image 4
Faber Diamante installation instructions Plan the Installation, Hardware Package Literature Package, Feet

Diamante specifications

Faber Diamante is a standout product in the realm of premium kitchen ventilation solutions, combining advanced technology with exquisite design. This range hood is renowned for its powerful performance and aesthetic appeal, making it a perfect addition to modern kitchens.

At the heart of the Faber Diamante is its innovative suction technology. The hood features a high-efficiency blower system that ensures optimal air extraction. With a high extraction rate, it effectively removes smoke, steam, and odors, keeping the kitchen fresh and pleasant. The powerful fan operates quietly, ensuring that cooking is not interrupted by unnecessary noise, creating a serene culinary environment.

One of the significant features of the Faber Diamante is its sleek, minimalist design. It is available in various finishes, including stainless steel and glass, allowing it to complement various kitchen styles. The low-profile design adds sophistication without overwhelming the kitchen space, enhancing its overall aesthetic.

A standout characteristic of the Faber Diamante is its user-friendly control system. The hood is equipped with push-button controls or modern touch controls, enabling users to easily operate the fan speed and lighting arrangements. This intuitive interface is designed for convenience, allowing for quick adjustments while cooking.

In terms of lighting, the Faber Diamante incorporates integrated LED lights, which provide excellent illumination over the cooking surface. The energy-efficient lighting not only enhances visibility but also contributes to a contemporary aesthetic, making cooking more enjoyable.

Maintenance is also a priority with the Faber Diamante. The hood features easy-to-clean, removable filters that ensure longevity and performance. These filters capture grease and impurities effectively and can be washed in a dishwasher, making upkeep a breeze.

The Faber Diamante embodies a commitment to sustainability with energy-efficient components that adhere to modern environmental standards. This focus on energy conservation allows homeowners to enjoy high-performance ventilation without a significant energy bill.

Overall, the Faber Diamante is a fusion of functionality and style. Its powerful performance, quiet operation, sleek design, intuitive controls, and easy maintenance make it an ideal choice for homeowners seeking a premium kitchen ventilation solution that doesn't compromise on aesthetics or efficiency. Whether you're a passionate home cook or an occasional chef, the Faber Diamante is engineered to elevate your cooking experience.