16
Thoroughly dry all surfaces and removable parts. Although this appliance automatically defrosts, a layer of frost may occur on the freezer compartment’s interior walls if the freezer door is opened frequently or kept open too long. If the frost is too thick, choose a time when there is less food in the unit and proceed as follows:
1. Remove existing food and all accessories, unplug the appliance from the outlet and leave the doors open. Ventilate the room thoroughly to accelerate the thawing process.
2.When defrosting is completed, clean your freezer as described in the “Cleaning and Care” section (page 15).
Caution! Don’t use sharp objects to remove frost from the freezer compartment. Only after the interior is completely dry should the appliance be plugged back in and switched back on.
Door Seal Cleaning
Remember to keep door seals clean. Sticky food and drinks can cause seals to stick to the cabinet and tear when you open the door. Wash seal with a mild detergent and warm water. Rinse and dry it thoroughly after cleaning.
Caution! Only after the door seals are completely dry should the appliance be powered on.
Replacing the LED Light
Warning: If the LED light is damaged, contact the customer service help line for assistance at
1.Unplug your appliance.
2.Remove the light cover by pushing up and out.
3.Hold the LED cover with one hand and pull it toward you with the other hand while pressing the connector latch.
4.Replace LED light and snap correctly in place.
