9
13.Unscrew the upper hinge axis, turn the upper hinge over and fix axis on it. Then place it aside for later use.
14.Realign the wires on the left and right slots of the refrigerator body as shown below.
15.Place the door in the correct position, adjust the upper hinge plastic part. Move the earth wire into the slot on the upper door from right to left and then fasten the upper hinge and earth wire with the self- tapping screws. Hold door in place when installing.
③
①
②
16.Connect reed switch according to step 3 (page 7) and then install the upper hinge cover (in plastic bag).
①
②upper hinge cover (left)
17.Turn the corner cover of the door 180° and install it onto the right corner of the upper door, then mount the upper cover of the upper door.
1 | 2 |
18.Take the reed switch out of the cover (part 3 in step 3) and mount it on the spare cover (found in spare parts bag, marked with an R). Put the cover you just removed in the parts bag.
Note: Be sure the front side of the reed switch fits correctly when mounting.
19.Install the corner cover, connect the reed switch and install the upper cover of the upper door.
3
1
2 
20.Open the upper door, mount door racks and then securely close the door.
