Fagor America BMF-200X Lower hinge part left, Note The washer may, stick to lower door, Handle

8

6.Loosen screws used to hold the middle hinge and remove middle hinge. Then remove the lower door.

7.Place the lower door on a smooth surface facing upwards. Change the handle to the right side by following step 5 described in page 7. Remove the self- tapping screws, detach the stop block and door holder.

①Handle covers

②	Special self-t apping screws	⑤ Door holder
③	Handle	⑥ Stop block
④	Screw hole covers	⑦ Self-t apping screws

Turn the door holder 180° and then install it and the stop block on the opposite side with the self-tapping screws.

1 2

9.Place the refrigerator flat on the floor, remove adjustable feet and self-tapping screws. Remove the front foot fixed board and lower hinge part.

		Washer
① Lower hinge part（right）		Note: The washer may
②	Front foot fixed board
		stick to lower door.
③	Adjustable bottom feet part
④	Self-t apping screws

10.Unscrew the lower hinge, change it to the opposite side and reattach and mount washer.

11.Change lower hinge part to the left side and front foot fixed board to the right side, then fasten with self-tapping screws. Finally install adjustable feet.

Lower hinge part (left)

12.Remove the lower door by pulling down and align the lower hole site and upper hinge axis. Turn the middle hinge piece 180°, change the washer on the axis to the upper side, adjust the middle hinge to the appropriate position and then reinstall it.

8. Change the screw hole covers on the middle cover plate from left to right.

Note: The washer may	Washer
stick to lower door.