Fagor America BMF-200X manual Door racks

7

Door racks

①Upper cover

②Upper hinge cover (right)

③Upper cover of upper door

④Corner cover

2.Remove the upper cover on the top of the refrigerator starting from the right side and then remove the upper cover of the upper door.

1

Then remove the corner cover and the upper hinge cover. Put all parts into the plastic parts bag.

23

3. Disconnect reed switches shown in images 1 and 2. Remove cover on the cabinet body shown in image 3.

1

2

3

4.Remove the special flange self-tapping screws indicated in the image below and the upper hinge below. Unplug the earth wire indicated below.

① Special flange self-tapping screws

	③upper
② Earth wire	hinge

Note: Please hold the upper door by hand during step 4 to prevent door from dropping.

5.Remove the upper door by lifting vertically and place it on a smooth surface with the panel facing upwards.

1

Remove the handle covers and screw hole covers, then remove special self tapping screws. Remove the handle and switch it to the right side, then install the self-tapping screws, handle covers and screw hole covers in reverse order from which they were removed.

	①	Handle covers
2	②	Special self-tapping screws
	③	Handle
	④	Screw hole covers
	⑤	Door holder
	⑥	Stop block
	⑦	Self-tapping screws

3

Loosen the self-tapping screws, detach the stop block and door holder. With the handle in place, reinstall the door holder and the spare stop block found in the plastic bag. Do not use the one you just removed, that one must be stored in the plastic parts bag.

1 2