6 STARTING UP AND
CHLD SAFETY LOCK FUNCTION
using the appliance
STARTING UP
a
Start/pause button
a To start up the washing machine you must press the start/pause button. The minutes remaining until the end of washing and drying will appear on the display at all times.
Select |
CHLD SAFETY LOCK FUNCTION
a
Lock function selection
The lock function ensures that the program will not be interrupted if any buttons are pressed.
The block function should be activated after the wash program and additional options have been selected.
Activating the lock function |
| |
a The lock function can be activated by |
| |
pressing the start/pause button and |
| |
holding it down for at least 3 seconds. | b | |
The display will show if it is activated. | ||
|
Deactivating the lock function
b The lock function is cancelled when the wash programme comes to an end. If you want to deactivate the block function before the end of the programme, you have to hold the start button down again for at least 3 seconds. After 3 seconds, the block function indicator will disappear from the display, and it will go into pause status.
The ON/OFF button does not cancel the block function.
Select |
Select |
18
