7 WASH PROGRAM PHASES

AND POWER OUTAGES

PROGRAM

PHASES

When the program is running, the program phase and the time remaining for it to end will appear on the display.

The active phases will appear successively at the top of the display as the program progresses. The time remaining until the end of the program will also appear on the display. Please Note: the display will update itself at regular intervals, but not minute by minute.

Any option button can be selected provided the wash phase in which it takes effect has not been passed and when the programme allows for the option.

Pressing the delay button during washing will have no effect on the washer-dryer.

Pressing the start/pause button during the wash activates the PAUSE function.

using the appliance

 

If the program is changed on the

 

selector dial during the washing and

 

drying process, the washer-dryer will

Important

switch itself to PAUSE status and the

original program will be cancelled.

 

 

If you need to add or remove a

 

garment during a program, press the

 

start/pause button and wait for the

 

door to unlock itself that the

 

temperature inside is not high. Press

 

the start/pause button again to restart

 

the wash from the same cycle phase

 

it had stopped at.

 

POWER OUTAGES

If there is a power outage, the washing machine will continue to run from where it left off after power is restored. The same will happen if the ON/OFF button is pressed.

warnings

Level the washing machine by adjusting the feet to reduce the noise level produced during the spin cycle.

Try and wash clothes of different sizes in the same wash program to even out the distribution of the clothes inside the drum during spin-drying.

This model is equipped with a safety system for spin-drying that prevents spin-drying from being carried out if the distribution of the clothes inside the drum is too concentrated. This prevents the appliance from vibrating too much.

If you find that the clothes are still excessively wet after the spin cycle, try re-starting the spin cycle after distributing the clothes more evenly in the drum.

19

Page 19
Image 19
Fagor America FAS 3612 operation manual Wash Program Phases Power Outages